UZK-80料位開關
UZK-80料位開關產品概述
UZK-80料位開關是一種用于固態物料（包括粉狀、粒狀、塊狀、膠狀等）的物位控制設備，適用于工業生產過程中料倉、容器內物料高度的監測與控制。該設備采用機械式檢測原理，通過微型電機驅動葉片旋轉，當物料觸及葉片時產生阻力信號，觸發開關動作并輸出報警或控制信號。其結構設計兼顧防塵與耐腐蝕特性，接觸物料部分采用不銹鋼材質，可適應多種工業環境。該產品廣泛應用于化工、塑料、水泥、制藥、飼料、食品等行業，特別適用于高粉塵、強腐蝕或溫壓變化較大的工況條件。145
產品工作原理
UZK-80采用永磁電機帶動檢測葉片以1轉/分的低速旋轉。當物料上升至葉片位置時，旋轉受阻產生的阻力通過傳動軸傳遞至內部檢測裝置，觸發微動開關輸出信號并切斷電機電源；當料位下降時，彈簧拉力使機構復位，電機恢復運轉并切換無料信號狀態。設備支持通過調整彈簧拉力適配不同比重的物料（建議適用范圍≥0.4g/cm³），且具備過載保護功能，在葉片承受異常沖擊時自動切斷動力以避免部件損壞。3712
結構與性能特點
該設備主體由不銹鋼葉片、鋁合金接線盒及防護等級為IP65的密封結構組成，工作溫度覆蓋-10℃至70℃（特殊設計可達200℃）。標準供電為220VAC/50Hz，功耗低于3W，輸出觸點容量為3A/250VAC單刀雙擲信號。葉片寬度10cm，軸長可根據安裝需求定制，支持水平或垂直安裝方式。其雙層油封設計能有效防止粉塵滲透，獨特的離合器裝置可在過載時保護電機持續運轉。針對不同安裝場景，用戶可選擇加裝防護擋板以避免物料直接沖擊葉片。51117
UZK-80 Rotary Level Switch Product Introduction
The UZK-80 is a mechanical level control device designed for detecting solid materials including powders, granules, lumps, and viscous substances in industrial silos or containers. It operates through a rotating paddle system that generates reliable switching signals upon contact with materials, making it suitable for process automation in industries such as chemical processing, plastics manufacturing, cement production, and food storage. The stainless steel construction ensures compatibility with corrosive or high-dust environments while maintaining stable performance under varying temperature conditions.41923
Operational Principle
Driven by a permanent magnet motor, the detection blade rotates at 1 RPM. When material level rises and impedes blade movement, the resistance triggers an internal mechanism to activate micro-switches for signal output and motor cutoff. After material level drops, the spring-loaded system automatically resets to monitoring status. The torque adjustment feature allows sensitivity customization for materials with different densities (recommended ≥0.4g/cm³). Its fail-safe design includes overload protection to prevent damage during unexpected mechanical stress.3724
Design Features
Constructed with SUS304 stainless steel blades and aluminum alloy housing, the switch achieves IP65 protection against dust and moisture ingress. Standard models operate within -10℃ to 70℃ (extendable to 200℃ with high-temperature versions), powered by 220VAC/50Hz with <3W consumption. The 10cm-wide blade and adjustable shaft length accommodate diverse installation requirements, supporting both side-mount and top-mount configurations. The dual-layered oil seal and clutch mechanism enhance durability, while optional protective shields can be installed to deflect material impact in high-flow areas. Electrical output provides SPDT contact rated 3A/250VAC for seamless integration with control systems.51125
UZK-80料位開關
UZK-80
產品描述
阻旋料位開關也有的稱之為阻旋物位計或者阻旋料位開關、阻旋物位開關等，主要是根據它具體的不同用途的不同名稱。阻旋式料位開關是采用交流微電機經減速后，帶動檢測葉片慢速旋轉。當被測物料的料位上升使葉片的轉動受到阻擋時，檢測機構主軸產生旋轉位移。此位移先使一個微動開關動作，發出有料的信號。隨后另一個微動開關動作，切斷微電機的電源使其停止轉動。只要倉內的料位不變，此種狀態便將一直保持下去。
詳細描述：
斷料報警器/斷煤開關
結構緊湊,外型小巧，進口品質、國產價格；
鋁合金殼體,堅實可靠;
原裝進口電機,性能穩定.
檢測散裝固體物料的旋轉葉片式開關技術；
高度集成的機械宇航密封，可防止粉塵沿軸滲入；
獨特的彈性離合器結構，葉片過載時，自動保護電機；
特殊葉片可用于低密度物料；
堵料報警開關系列分保護管型、旋轉確認型、長度變更型、耐熱型；
電源電壓：：220VAC（110VAC、24VAC、24VDC可選）；
觸點容量：250VAC/（阻性負載），單刀雙擲,雙刀雙擲；
工作溫度：-10～80℃（高溫型1000℃）；
防護等：IP65，特殊型號耐壓防爆。
UZK-80料位開關
微型斷路器S203M-C20 NA
23D-63(B)6.8MPa電磁換向閥
PH-200LC轉速表
CJX2-F265交流接觸器
上一篇 JH4010料位開關 http://www.uoncy.cn/product/d167919.html
|
