SR2-10S料位開關
SR2-10S料位開關產品概述
SR2-10S阻旋式料位開關是一種用于固態物料（包括粉狀、粒狀、塊狀、膠狀等）的物位控制器，廣泛應用于化工、塑料、水泥、制藥、飼料、食品等行業。該產品采用微型馬達驅動裝置，通過傳動軸與離合器連接，當葉片未接觸物料時馬達正常運轉，接觸物料時馬達停止并輸出繼電器信號。其設計注重可靠性，如特制油封防粉塵滲入、三軸承支撐傳動軸、扭力彈簧可調等，適用于不同比重物料的檢測。產品支持水平或垂直安裝，葉片材質為SUS304不銹鋼，防護等級達IP65，可適應-20℃至+85℃（常溫型）或-20℃至+400℃（高溫型）的物料環境。125
SR2-10S Rotary Level Switch Product Overview
The SR2-10S rotary level switch is designed for solid material level control, including powders, granules, lumps, and viscous substances. It is widely used in industries such as chemical, plastics, cement, pharmaceuticals, and food processing. The device utilizes a micro-motor drive system connected to a clutch via a transmission shaft. When the blade rotates freely without material contact, the motor operates normally; upon encountering material resistance, the motor stops and triggers a relay signal. Key features include a dust-proof oil seal, three-bearing shaft support, and adjustable torque spring for varying material densities. The blade is made of SUS304 stainless steel, with IP65 protection and temperature adaptability ranging from -20℃ to +85℃ (standard) or -20℃ to +400℃ (high-temperature variant). Installation options include horizontal or vertical mounting.378
產品特點與工作原理
SR2-10S采用機電分離結構，葉片受阻時離合器自動打滑以保護電機，無需拆卸即可維護內部部件。其扭力穩定性強，可通過彈簧調節適應不同密度物料（≥0.4g/cm³）。水平安裝時建議葉片向下傾斜10°~20°以減少沖擊，并需避免進料口直裝或加裝擋板防護。供電支持AC220V/DC24V，功耗僅4W，觸點容量為10A/250VAC。獨特的雙層防塵設計確保戶外使用可靠性，輕量化結構便于安裝。2415
Features and Operating Principle
The SR2-10S employs an electromechanical separation design, where the clutch automatically disengages under overload to protect the motor, allowing maintenance without disassembly. Its torque stability enables adjustment via springs for materials with densities ≥0.4g/cm³. For horizontal installation, a 10°~20° downward blade angle is recommended to minimize impact, and direct alignment with feed ports should be avoided. The device operates on AC220V/DC24V with 4W power consumption and 10A/250VAC contact capacity. A dual-layer dust-proof mechanism ensures outdoor durability, while compact construction simplifies installation.51820
應用場景與注意事項
該產品適用于水泥倉、煤倉、灰倉等高粉塵環境，可檢測料位上限或下限。安裝時需確認電源電壓與標識一致，接線盒入口朝下并鎖緊電纜螺母。物料溫度超過80℃時建議選用高溫型號，比重較輕的物料需更換大葉片。避免隨意調整扭力彈簧以免誤動作，定期檢查葉片磨損情況。1623
Applications and Precautions
Ideal for high-dust environments like cement silos, coal bunkers, and ash hoppers, the SR2-10S detects both high and low material levels. Installation requires voltage verification and downward-facing cable glands. For material temperatures exceeding 80℃, high-temperature models are advised, while low-density materials may require larger blades. Unauthorized torque spring adjustments should be avoided to prevent malfunctions, and regular blade inspections are recommended.71022
SR2-10S料位開關
技術特點
性強:應用于各種場合，飛灰、顆粒、粉體液體枯胭、導電和非導電物料。
抗粘附電路:來用抗粘附電路可以物料的粘附而產生虛假信號。
探頭可折式:探頭與控制器可分離，無電纜連接，安裝拆除不影洞進出科。
探頭耐高低溫:探頭適臺184260C的工作環境，還提供國資高溫探頭。
輸出實量大:采用容盤為10A .11的腿電器敏點輸出，并有狀態燈顯示工作狀態，0~ 30動科時功能貼片技術:使電路線路抗壙性更強，電路參數更穩定更可靠，
浪壓技術:提高了探頭的使用壓力，延長的使用壽命
技術參數
1.電源：220VAC/110VAC/24VAC/24VDC
2.觸點容量：250VAC/10A SPDT（單刀雙擲）
3.功率：4W
4.葉片轉速：1RPM（轉/分）
5.力矩：1.0kg×cm
6.物料比重：≥0.5g/cm3
7.工作溫度：-10℃-80℃（zui高可達400℃）
8.絕緣電阻：≥100MΩ
9.介電強度：1500V*1min
SR2-10S料位開關
DHS-120XL測溫儀
CJX1-110/22(3TF5022)交流接觸器
HD13-1000/31刀開關
LXK3-20H/H3行程開關
LMZJ1-0.5 750/5電流互感器
上一篇 ZP2000料位開關 http://www.uoncy.cn/product/d167088.html
|
