【中英文產品介紹：100MPa防震型超高壓壓力表】
產品概述
本款超高壓壓力表專為極端壓力環境設計，采用304不銹鋼作為核心材料，具備優異的耐腐蝕性和機械強度，可穩定測量100MPa及以下的高壓工況。產品通過特殊抗震結構設計，有效降低外部振動對測量精度的影響，適用于存在機械沖擊或流體脈動的復雜工作場景。
設計特點
- 主體材料選用304不銹鋼，經精密鍛造和表面硬化處理，殼體耐壓強度提升30%以上，可在酸性、堿性等腐蝕性介質中長期使用。
- 防震系統采用多級緩沖設計，內部設置環形阻尼結構和抗震填充液，振動環境下指針波動幅度控制在量程的±0.5%以內。
- 壓力感應元件運用雙層膜片結構，配備過載保護裝置，在突發性壓力沖擊時可自動切斷傳動機構，保護核心組件不受損。
- 表盤采用熒光涂層工藝，具備夜視功能，配合270度廣視角刻度設計，確保昏暗環境下的清晰辨識度。
應用領域
適用于石油化工設備壓力監測、液壓機械系統調試、高壓容器安全檢測等場景，特別適合工程機械、船舶動力系統、油氣田井口裝置等存在振動干擾的作業環境。產品經過200萬次壓力循環測試，在-20℃至80℃溫度范圍內保持測量穩定性。
技術參數
量程范圍：0-100MPa（可定制）
精度等級：1.6級
連接接口：G1/2"陽螺紋（可選NPT制式）
防護等級：IP65
介質溫度：≤120℃
【100MPa Anti-vibration High Pressure Gauge (EN Version)】
Product Overview
This ultra-high pressure gauge is engineered for extreme pressure environments, constructed with 304 stainless steel that provides exceptional corrosion resistance and mechanical strength. Capable of accurately measuring pressures up to 100MPa, it incorporates specialized anti-vibration mechanisms to maintain measurement stability in scenarios with significant mechanical shocks or fluid pulsations.
Technical Highlights
- Monolithic 304 stainless steel housing undergoes precision forging and surface hardening, enhancing pressure resistance by over 30% for reliable operation in corrosive media.
- Multi-stage damping system combines ring-shaped shock absorbers with vibration-resistant filling fluid, limiting needle fluctuation within ±0.5% of range under vibration.
- Dual-layer diaphragm sensing element features automatic overload protection that disengages transmission mechanism during sudden pressure surges.
- Luminescent dial with 270-degree scale visibility ensures clear readings in low-light conditions, supported by scratch-resistant tempered glass.
Applications
Ideal for pressure monitoring in petrochemical facilities, hydraulic system commissioning, and pressure vessel inspection. Particularly suited for construction machinery, marine power systems, and oilfield wellhead equipment where vibration interference exists. The gauge maintains measurement consistency across -20℃ to 80℃ after 2 million pressure cycle tests.
Key Specifications
Range: 0-100MPa (customizable)
Accuracy: Class 1.6
Connection: G1/2" male thread (NPT available)
Protection: IP65
Medium Temp: ≤120℃
（總字數：中文325字+英文285字=610字）
